BAS Operator Drilldown · AHU

AHU-2 · Built-up VAV air handler

Trane M-series · 22,500 CFM · back to ↩ Floor plan

Read-only / advisory No BAS writes Simulated values (sim) Unit: Off Alarm active Filter alarm Alarms: 1 open / 2 recent
Unoccupied · Off —

Air Temperatures

Supply / return / mixed / outside air. Live BAS bindings overlay simulated values when wired.

Air-temps binding: Demo (bound=0 · stale=0 · demo=6 · missing=0)

Supply Air
— Demo
Supply Setpoint
55.0 °F (sim) Demo
Discharge Setpoint
55.0 °F (sim) Demo
Return Air
78.6 °F (sim) Demo
Mixed Air
78.6 °F (sim) Demo
Outside Air
82.1 °F (sim) Demo

Supply Fan SF-2

Supply fan status and VFD feedback. Simulated.

Status
Off
Speed Cmd
0 % (sim)
VFD Speed
0 % (sim)
VFD Amps
0 A (sim)
VFD Fault
No fault

Chilled-water cooling coil

Cooling coil valve / DX state. Simulated.

Coil Kind
chilled_water
Valve / Stage
0 % open (sim)
Leaving Air
—
Active
No

Hot-water heating coil

Heating coil valve / stage state. Simulated.

Coil Kind
hot_water
Valve / Stage
0 % open (sim)
Leaving Air
—
Active
No

Outside Air / Economizer

OA damper, RA damper, economizer mode. Simulated.

OA Damper
0 % open (sim)
RA Damper
100 % open (sim)
Min OA
20 % (sim)
Economizer Mode
Disabled (unit off)
Economizer Enabled
No

Filter / Static Pressure

Filter loading and duct static pressure. Simulated.

Filter
Pre-filter / final-filter bank
Filter ΔP
1.08 in. wc (sim)
Filter Alarm Threshold
1.10 in. wc (sim)
Filter Status
Approaching alarm
Duct Static
0.00 in. wc (sim)
Duct Static SP
1.50 in. wc (sim)
Building Pressure
0.00 in. wc (sim)

Alarm History

Recent alarm/abnormal events. Open (manual reset required) listed first. Simulated.

  • 2026-05-09 09:48 FILTER-DP-HI · Filter differential pressure above alarm threshold — change filters OPEN
  • 2026-05-07 22:13 SF-PROOF · Supply fan proof-of-flow lost briefly during start cycle Auto-reset

Point / Detail Navigation

Drill into a specific point or related operator surface. Unresolved kinds render as disabled hint chips.

  • supply_air_temp → point_detail (not yet routed)
  • filter_dp → point_detail (not yet routed)
  • trends → trends (not yet routed)
  • alarms → alarms (not yet routed)
  • floor_plan → floor_plan

Operator Notes

Filter loading at alarm threshold; supply fan held off.

  • Air-temp panel pairs supply/return/mixed/outside so the operator can sanity-check coil work and OA mixing in one glance.
  • Supply-fan + VFD panel surfaces commanded speed, measured speed, amps, and fault state — three different fault signatures are distinguishable.
  • Cooling and heating coil panels expose valve position and leaving-air temp; activeness flags surface as hero chips for at-a-glance state.
  • Filter ΔP shows current loading vs alarm threshold, so a filter-change reminder is obvious before it trips an alarm.
  • Alarm history surfaces both auto-reset events and OPEN trips that still require manual intervention.